The grinding wheel of the machine adopts water grinding disc, equipped with a snail buckle joint, frequency conversion speed regulation function, No. 1 No. 2 forming motor 4.5 kW, No. 3, No. 4, No. 5, No. 6 precision polishing motor 3 kW (No. 1-6 motors stand upright, The bottom of the processing is flat and polished, the front of the movable stone is processed with the corner line, and the edge groove is polished. Processing stone, chamfering the front of the slate), back-cutting 7.5 kW for the No. 11 motor (the No. 11 motor is placed at an angle of 45 degrees, installed with a diameter of 300 saw blades to process slate, stone, and other materials, the back can be back-cut without leaving) according to the stone or Different sizes and thicknesses of rock slabs can be used to grind various flat stones. The straight edge chamfering of rock slabs can see light, and the edge-pulling grooves are polished. , 45°C chamfering of the straight bottom edge, side polishing of small R round belt, groove polishing, skirting line, anti-skid groove, French edge, straight edge, angular edge and other shaping and polishing, rough grinding, fine grinding and polishing process once Completed, the back cutting and the bottom belt polishing are completed at one time, the structure is advanced and reasonable, the front and rear of the motor can be adjusted electrically, the lifting and moving, and the pressure of the abrasive contacting the stone of a single motor is displayed by a digital meter, which is convenient for the operator to quickly control the abrasive wear condition to compensate and avoid occurrence of Manual wheel change adjustment speed is slow, there are many links and complicated operators are unwilling to change the wheel, the situation of slow wheel change occurs, high precision, fast efficiency, convenient operation, simple maintenance, during the grinding process can be adjusted electrically by the lift switch. The maximum processing speed and processing volume is 3m/min. The normal use of machinery is equivalent to the normal stone processing workload of 15 people, and the process defects caused by workers during processing are eliminated.
vertical edging machine 11641