发货:3天内
立式充填包装机
Vertical form fill seal packaging machine
DXD-2008\DXD-3000\DXD-5000 立式充填系统组合机
Vertical form fill seal packaging system
主要特征 Main standard features
立式充填包装机 Vertical form fill seal packaging machine
该机釆用日本PLC编辑器和触摸屏人机界面，中英文操作界 面，各工作状态，操作指令，故障状态，生产统计等一目了然，操作简便。送膜机构釆用交流伺服电机控制，送膜过程平稳，定位精度高，不需润滑，不怕粉尘。生产过程中无需停机即可实施修改参数，调整位置。该机选用高精度智能温控器，热封温度稳定，配齿形封口器，使产品封口牢固。带有自动故障报警显示功能，如切割切到物料，安全门未关，卷膜跑偏，卷膜用宪等。
Using Japan PLC programmer and display screen, which is easy to predominate running state, trouble state, operation order and production state. Using AC Alternating Current servo motor to control film pulling. In the course of film pulling it is stable, and with high accuracy orientation. Lubricating is not needed it is possible to revise parameter and adjust position without stopping the machine. Using temperature controller to keep temperature of hot seal unaltered to use den from sealer to seal film highly series is equipped with automatic trouble alert of find product to be cut by knife, door not be closed, film wrapping not to run exactly and film to be used up etc.
主要参数 Main technical data
型号/Model DXD-2008 DXD-3000 DXD-5000 | |||
包装速度/Packaging speed (bag/min) | 25-60 | 20-50 | 20-50 |
制袋尺寸/Bag Size (mm) L:100-300 L:100-330 L:100-450 W:75-240 W:90-285 W:120-310
| |||
气压要求/Air consumption | 0.36m3(normal)/min 0.6 MPa | 0.4 m3 (normal)/min 0.6 MPa | 0.5 m3 (normal)/min 0.6 MPa |
包材尺寸/Film size ( mm ) Roll:Φ400 Outer: Φ400 core inner: Φ75 core inner:Φ75
| Outer: Φ400 core inner:Φ75 | ||
电源/Power (V/Hz/kW) | 220/50/3 | 220/50/3 | 220/50/3.5 |
包装尺寸/Dimension (mm)(LxWxH) 1650x1300x1700 1680x1400x1850 1680x1400x1850 | |||
